One of the most noticeable aspects of a high efficiency condensing furnace is that it has a different type of venting system than a conventional furnace. If you're thinking about installing a condensing furnace in your home, you might have some questions about this unique style of venting. Today we're going to talk about how high efficiency furnace venting works and how you can ensure that your system is properly venting the byproducts of combustion out of your home!
Why is high efficiency furnace venting unique?
When your furnace burns natural gas to heat your home, it produces combustion gases as byproducts that need to be vented out of your home.
With a conventional furnace (under 90% efficiency), combustion gases are exhausted through a vertical vent that's attached to your system. A high efficiency condensing furnace, on the other hand, makes further use out of those gases before they leave your home.
You see, the combustion gases that are vented outside by a conventional furnace still contain a certain amount of heat. A high efficiency condensing furnace extracts that extra heat with a second heat exchanger. After this happens, the remaining byproduct becomes a mixture of carbon dioxide and water, which requires a different type of venting system.
How does high efficiency furnace venting work?
The condensate that is left over from a high efficiency condensing furnace contains acidic water that would damage normal vents. As a result, instead of using a conventional vertical venting system, a high efficiency system uses PVC pipes that are connected to your furnace and lead out of the side of your home. These pipes are installed during the installation of your high efficiency furnace.
A condensing furnace can provide around 20-35% energy savings during the colder months in O’Fallon, MO compared to standard furnaces. Although, it is highly important that you use your condensing furnace correctly and that it is installed properly for the most seasonal efficiency. If your condensing furnace is installed incorrectly, not only will it decrease the efficiency of your furnace, it will also cause it to break down quicker. To learn more about getting a condensing furnace installed, call us today.
The average cost of a furnace installation is about $3,000-$7,000 in O’Fallon, MO. Some things that can cause the price to vary are:
- The size of your house.
- How well your home is insulated.
- The type of furnace you want installed.
To get a new furnace you should do the following in O’Fallon, MO:
- Have your current furnace inspected to see if you should have it repaired or replaced.
- Get multiple estimates from HVAC contractors.
- Look into financing options through each HVAC contractor.
When getting a new furnace, it is important that you get estimates from multiple companies so that you can compare rates as well as the type of furnaces they suggest. To learn more about getting a new furnace installed, contact us today.
How can you ensure your high efficiency furnace is venting properly?
If the condensate from your high efficiency furnace were to leak out of the PVC pipes, or if the pipes weren't draining the condensate correctly, it could cause damage to your home. That's why it's important to work with a high-quality contractor like Jerry Kelly who will ensure that your venting pipes are tightly secured and properly installed.
If you have any questions about high efficiency furnace venting, or if you'd like a heating system serviced or installed in your home, contact Jerry Kelly, your St. Charles heating and cooling contractor. We service the St. Louis area, including towns like Ballwin, Chesterfield and Clarkson Valley.